Factory Reset Cisco Phone 8841

Factory Reset Cisco Phone 8841. Unplug the phone's lan cable. Cisco 7841 phone factory reset:

Cisco 8841 Cebod
Cisco 8841 Cebod from docs.cebodtelecom.com

A factory reset may be recommended by your technical support agent as part of the troubleshooting process. The reset clears all the phone parameters. Press ok and hold it for 10 seconds.

Press And Hold # Button While Plugging The Phone Back In.

Hit the 2 key 4 times. Select option 4 reset settings. to navigate to the reset settings menu. • if using a power brick, unplug it.

Now, You’ll See An “Erase” Softkey Appear.

If using poe, unplug the lan cable. Before performing a factory reset we must ensure network connectivity with access to a dhcp server providing the correct tftp address (option 150 or option 66). Unplug the phone's lan cable.

Cisco Ip Phone 8841 Navigating Your Phone Line Buttons Line Buttons Are Located On Both Sides Of The Phone Screen.

For information not covered below, please refer to the manufacturer’s user guide. Only the cisco ip phone 8845, 8865, 8841, 8851 and 8861 support the method. Then press ok to confirm factory reset.

Hit The 2 Key 4 Times.

Alternatively, you can also follow these steps: Unplug the ethernet cable from your cisco ip phone. When the headset and speaker buttons are lit, release #.

/Admin = Path To Access Admin Page Of Your Phone.

Admin) > select “reset to factory”, and press ok. The device should delete and. This is a video on how to factory reset a cisco 8841 model ip phone, with poe.

Share This Post