Erase Startup Config Cisco Switch Command

Erase Startup Config Cisco Switch Command. Resetting the cisco router to factory default involves erasing the nvram. Cisco nexus 9000 series switches.

Copy Config from TFTP To Startup Configuration YouTube from www.youtube.com

The show interfaces command is unsupported in some earlier cisco ios software releases, such as 12.2(25)fx. Enter configure terminal to go to global. Firstly note that this will wipe the configuration off the switch, do not do this in a production network unless you intentionally want to do this.

Cisco Nexus 9000 Series Switches.

Also note, you can reload the router successfully, but not from the ios command line. In other words, you are undoing the 'write erase' process. In catalyst 4500/4000 and 6500/6000 series switches running cisco ios software, you can.

Enter End, And Then Enter The Write Erase Command To Delete The Current Startup Configuration On The Router.

Enter configuration commands, one per line. To add a banner message : You can delete the current startup configuration files and return the router to its factory default settings with the erase nvram:

Enter Clear Config All To Reset The Entire System.

The result of executing either command is still the same whch is deleting the startup config file. You need to right click the router and choose reload. The show interfaces command is unsupported in some earlier cisco ios software releases, such as 12.2(25)fx.

It Is Used To Set The Name Of The Device.

To your router, and enter the privileged exec mode by entering enable and then entering the enable password command. It provides a short message to the user who wants to access the switch. Erases the file from nvram switch# reload:

Changing The Hostname Of A Switch To Gfgswitch :

Complete router1# reload system configuration has been modified. Edited february 16, 2020 at 4:26 am. [confirm] [ok] erase of nvram:

Share This Post

Post Comment