Diy Wood Cornice Board

Diy Wood Cornice Board. Cut a piece of batting that’s a few inches longer than the box on all sides. You can see it laid out in the diagram.

DIY Wood Window Cornice Window cornices, Window cornice diy, Kitchen
DIY Wood Window Cornice Window cornices, Window cornice diy, Kitchen from www.pinterest.com

Lightly sand wood with 120 grit sandpaper and stain the pieces. Next iron your fabric then lay it out on your work surface and place the board on top of it. Looking for an inexpensive way to dress up your windows?

Use A Jigsaw To Cut It.

Picture hangers for wall attachments: My house has pretty boring windows. Next iron your fabric then lay it out on your work surface and place the board on top of it.

Gather Your Cornice Board, 2 Return Pieces, Screws And Drill.

Lightly sand wood with 120 grit sandpaper and stain the pieces. Once dry, add 2 keyhole pockets in the back edge of the two small pieces using a keyhole bit. A little because of the architecture of the ho.

Our Cornices Are Made Of Real Wood And Lend Sophistication To Many Window Treatments.

This will make it easier to join your wood pieces together without it splitting. We started with the plywood boards for the center and cut a piece of plywood that with a 1″x 1/2″ border around the edges. Level it, then drill and countersink pilot holes into at least two studs.

Pull The Batting To The Back And Staple, Trimming The Excess As You Go.

Here’s the cut sheet for the diy pallet wood cornice board project. Make sure you get the heavy duty ones to make sure it holds the weight with no problem. You can see it laid out in the diagram.

The Cut Edges Don’t Need To Be Perfect.

After reading about a million different ways to create a cornice board, i decided not one method was really perfect for me, and ended up taking bits and pieces from each of the different versions. Cut board into three pieces using a miter saw. It will be covered with batting and fabric which hides any unevenness.

Share This Post