Cisco Ip Sla Icmp Echo Configuration Example. The ip slas icmp path echo operation records statistics for each hop along the path that the ip slas operation takes to reach its destination. Ip slas overview” chapter of the cisco ios ip slas configuration guide, release 12.4.
You can also use in combination the attribute threshold. Configuring ip slas icmp echo operations. For example, the ip sla path echo operation will use icmp ping packets.
For Example, The Ip Sla Path Echo Operation Will Use Icmp Ping Packets.
An example of this is provided later in this article. Ip slas overview” chapter of the cisco ios ip slas configuration guide, release 12.4. If you send a icmp packet every 20 seconds with a timeout of 15s.
Command Or Action Purpose Example:
But by experience, i would recommend sending a ping every 5s with a timeout of 3s let's say it's good. Icmp path echo is useful for determining network availability and for troubleshooting network connectivity. The cisco ios ip slas internet control message protocol (icmp) echo operation.
Restrictions For The Ip Slas Icmp Path Echo Operation We Recommend Using A Cisco Networking Device As The Destination Device Although Any Networking
Then we will exist this configuration level. Icmp echo is useful for troubleshooting network connectivity issues. This module also demonstrates how the results of the.
The Default One Is 60 Seconds.
End detailedsteps commandoraction purpose step1 enable enablesprivilegedexecmode. In cisco ios xe release 3.2se, this feature was supported on the following platforms: There are two elements to the cisco ip sla configuration:
We Can Give 1 To 604800 Seconds.
You can also use in combination the attribute threshold. Ip slas configuration guide, cisco ios release 15m&t. Configuration examples for ip slas icmp path echo operations example configuring an icmp path echo operation