Cisco Air-Cap3702I-A-K9 Factory Reset

Cisco Air-Cap3702I-A-K9 Factory Reset. Step 1 make sure that the cisco wireless lan controller ds port is connected to the network. You can find additional information at this url.equipped with.

CISCO AIRCAP3702IAK9 Wireless Access Point RoundyBox
CISCO AIRCAP3702IAK9 Wireless Access Point RoundyBox from roundybox.com

Is any one using these as wall monuted ap's? When router is powered on, press the reset button and hold for 30 seconds. Used in factory production lines.

Connect To The Access Point With A Serial/Console Cable, Fire Up Putty And Connect To The Correct Com Port.

Hello, i have to reset a lot of those aps to default settings, and i'd like to ask if i do it correctly: Whilst holding the mode button, connect the power cable or. Used in factory production lines.

When Router Is Powered On, Press The Reset Button And Hold For 30 Seconds.

When router is powered on, press the reset button and hold for 30 seconds. The cisco aironet 3700 series access points deliver industry leading performance for medium to large applications. In order to use that method you need to have physical access to ap.

Press And Hold The Reset Button With Sensitive Material While You Power On The Router.

I have no experience with cisco whatsoever. Step 1 make sure that the cisco wireless lan controller ds port is connected to the network. Press and hold mode button on ap and provide power to ap.

Type Reset To Reboot The Ap.

Then, find the reset button on the router (generally back side of the router). To reset your cisco router to its factory default configuration using the reset button: The 3700 series access point is referred to as the access point in this document.

This Guide Also Provides Mounting Instructions And Limited Troubleshooting Procedures.

All of the devices used in this document. To reset your cisco router to its factory default configuration using the reset button: Plug the power cord while holding mode button until i see mode button pressed line.

Share This Post